Step 01- Wash surfaces that are to be painted

Step 02- Indicate wood replacement, we physically mark these before starting replacement. The board replacements are determined during the consultation.

Step 03- Wood replacement

Step 04- Caulk open joints, this is part aesthetic and part to protect from moisture, water infiltration.

Step 05- Substrates that are peeling are to be scraped, sanded and spot primed. Primer choice will be matched to the cause and solution to the peeling.

Step 06- Tack cloth and dusting of windows, doors and columns

Step 07- All finished paint to be screened

Step 08- Finish coats applied

Step 09- Walk through and touch ups

Step 10- Windows washed

Step 11- Clean Up

ROOM PREPARATION

Step 01- Move necessary furniture

Step 02- Cover tile/hardwood with building paper

Step 03- Drop cloths to be laid out

Step 04- New plastic to be used on furniture

Step 05- Determine what wall fixtures, pictures and blinds are to be removed

Step 06- Visual inspection of any existing floor damage

PREPARATION OF SURFACE

Step 01 - Repair nail pops and broken seams

Step 02- Pole sand all walls that are to be painted. Walls to be dusted.

Step 03- Trim work to be lightly sanded (doors - base - crown -jambs)

Step 04 - Trim work to be dusted and tack clothed

Step 05- Bare wood or sheet rock to be primed

PAINTING OF SURFACE

Step 01- All finish paint to be screened

Step 02 - Finish coats to be applied

FINISH AND CLEAN UP

Step 01 - Coverings to be removed

Step 02 - Sweep floors

Step 03 - Furniture to be moved back

Step 04 - Switch plates/window treatments to be put back

Step 05- Walk through and touch up